Chemical Name: |
Bis[3-(triethoxysilyl)propyl]tetrasulfide with Carbon Black |
CAS No: |
40372-72-3 |
Equivalents:
Product |
Supplier |
Z-6945 |
Dow Corning |
X 50-S |
Evonik (formerly Degussa) |
Typical Properties:
Index |
Value |
Appearance |
Black fine granule with slight alcohol odor. |
Sulfur Content, % |
10.5~12.5% |
Weight Loss Rate (100℃/2h) |
≤2.0% |
Butanone Insoluble Matter Content |
50.0~54.0% |
Ash Content (1000℃) |
10.5~12.5% |
Abstract:
SCA-S69X/C is a blend of the bifunctional, sulfurcontaining organosilane SCA-S69X, bis-(γ-(triethoxysilyl)-propyl)-tetrasulfane, and an N 330 type carbon black in the blend ratio 1:1.
Applications and Performance:
SCA-S69X/C reacts with fillers containing silanol groups during mixing and with the polymer during the vulcanization process under formation of covalent chemical bonds. This imparts better tensile strength, higher module, reduced compr SCA-S69X/C ession set, increased abrasion resistance and optimized dynamic properties. SCA-S69X/C is used in many applications where white fillers containing silanol groups are involved and optimum technical properties are required.
1、Tires: An excellent reinforcing agent in tires to reduce heat built-up, reduce rolling resistance and improve the tires´ wet grip.
2、Shoe Soles: Generally applicable silane for improving abrasion resistance of sole compounds containing precipitated silica.
3、Mechanical Rubber Goods: General use silane for achieving good dynamic properties, low compression set and high abrasion resistance in mixtures containing white fillers.
Packing:
The regular packing of this product is 25kg plastic pail, 200L steel drums and 1000L immediate bulk container.
Storage and Shelf Life:
Should be stored in dry, cool, ventilated room; keep away from water, moisture, high temperature and fire. This product has a shelf life of at least 12 months if stored in tightly closed original container at room temperature.
If this product is kept beyond the shelf life recommend on the product label, it is not necessarily unusable, but a quality control should be performed on the properties relevant to the application.